Ground Force 2/3 4x4 RCSB drop kit #9983

[Hemi Joe]

Do any members here have any experience with this kit? Any pictures? I'm thinking about installing it on my truck, looking for a little better handling and I dig the look. Seems like the perfect amount, I can't slam it into the weeds, since I do live in PA and have to deal with potholes and snow.

 

[Hemi Joe]

I guess nobody's running this kit. With a google search I only found one guy with it on another forum.

 

[Graygoose]

I have the 2" lowering in rear, good stuff.

 

[Hemi Joe]

Looks good, I'm considering that as well, since I have 4x4 the 2/3 drops are pricey.

 

[blackout11]

2/3 should it not be a 2/4 had a 2'' drop for sale but sold it worked great while it was in

 

[Hemi Joe]

2/3 should it not be a 2/4 had a 2'' drop for sale but sold it worked great while it was in

Nope, it's 2/3 for 4x4. The front suspension is different, so the kits are different.

 

[Graygoose]

Spindle?

 

[Hemi Joe]

Not sure what all is different, haven't seen a 2wd with the front wheels off. The 4wd has CV shafts and struts. I know on the ground force 2/3 drop you need a strut tamer to change the front springs, so the kit comes with front and rear springs, and rear shocks. It's $800 which is hard to swallow, plus I haven't seen any feedback on it.

 

[garner]

All ground force are 2/3 no matter the drive

 

[Hemi Joe]

All ground force are 2/3 no matter the drive

OK, and as far as I know they're the only company with a front/rear drop kit for 4x4.

 

[Blue Streak]

Why so much $$$$$$$$$$$$$$$$$$$?!

Edit: does anyone else offer a kit for the rcsd 4x4?

 

[BrBlack]

I have the 2/3 GF kit. (CC 4x4)
Been running it for just under 2 years now. No issues at all! The kit is pricey but is worth every penny IMO. Progressive coils front and rear plus shocks make the truck handle much better!!

The front is not a true 2" once installed. I found it to be about 1.5" then a few months later it settled to about 1.75". the rear was a bit more than 3". cant remember exaclty what it was but in the 3.25"-3.5" range.

there are a few threads in this section where BlackRamHemi outlines his instal of the same kit. Its worth looking for i know it helped me when i did mine.

 

[Blue Streak]

I have the 2/3 GF kit. (CC 4x4)
Been running it for just under 2 years now. No issues at all! The kit is pricey but is worth every penny IMO. Progressive coils front and rear plus shocks make the truck handle much better!!

The front is not a true 2" once installed. I found it to be about 1.5" then a few months later it settled to about 1.75". the rear was a bit more than 3". cant remember exaclty what it was but in the 3.25"-3.5" range.

there are a few threads in this section where BlackRamHemi outlines his instal of the same kit. Its worth looking for i know it helped me when i did mine.

I looked but could not find it. Can someone please post a link.

 

[BlackRamHemi]

I looked but could not find it. Can someone please post a link.

I'm not sure either

maybe this one?

http://www.ramforum.com/f39/strictly_4x4_lowering_thread-12208/index5.html

My 4 year old Ground Force 2/3 was about 1.75"/3.75" and sits about dead level
currently running 305/50R20 General Grabber AT2's on 14' Sport Wheels.

 

[Blue Streak]

Thanks! I've been on the fence between 2" rear lvl or the GF 2/3. I love the stance of your truck and I'm pretty sure this is the route I'm going to take. Less than 2 weeks until my truck arrives, can't wait!

Edit: Your truck is sick! You did a great job!!!