I am leveled.

[dodgeguy]

Thanks.

But I got issues. I got the 4wd wobble thing. Ugh. I used 4wd auto to lessen loss of traction up a hill and it does that wobble thing. I'm wondering if it's in the CV joints. Maybe over extended when I took out the struts? Maybe there are some balls inside the boot not in the right place?

Any 4th genres that did the install them selves? Also the ones that are leveled have you used 4wd yet?


---
- Sent from my AT&T iPhone 4.

alittle wobble at take take off, none at 35 mph. Really noticeable on
hard accelleration.

 

[LB3711]

So you were driving straight, on asphalt, in 4wd and it was shuddering? How bad, slight vibration or death wobble?

both straight and turn. more than slight but I'm not sure what a death wobble is like.

I have to do a test drive to determine what mine does.

 

[RubberFrog]

As you know, you'll experience a lot of chatter when turning on pavement. Do a straight line test.

 

[LB3711]

http://www.readylift.com/c-22-dodge-lift-kit-dodge-suspension-leveling-kit.aspx


---
- Sent from my AT&T iPhone 4.

 

[quietpeen]

$800 for hi angle cv joints....ummm no thanks...LOL

 

[RubberFrog]

^ no ****!

"Hi, I'm Mr Kore and my **** is gold plated. "

 

[NJDodger]

$800 for hi angle cv joints....ummm no thanks...LOL

Maybe with those you can stack 2 3" spacers in front and toss a 4"block out back and BAM, you've got a 6-4 lift for like a grand!

 

[nim81]

Maybe with those you can stack 2 3" spacers in front and toss a 4"block out back and BAM, you've got a 6-4 lift for like a grand!

you can be the Guinea pig!

 

[NJDodger]

you can be the Guinea pig!

Sure why not! Get me the parts and I'll try it out and let you know how it goes!

 

[nim81]

Sure why not! Get me the parts and I'll try it out and let you know how it goes!

haha! i wish!

 

[RubberFrog]

Don't forget the diff drop brackets. Even kore isn't going to make up for that kind of cv angle.

 

[nim81]

for the price it should!! lol

 

[LB3711]

What about dropping the front diff to make up for the level to put the CV back to stock angle? Would that work?


---
- Sent from my AT&T iPhone 4.

 

[RubberFrog]

That would work, but I don't know where to get 2" drop brackets. Procomp sells 4" drop brackets.

 

[NJDodger]

That would work, but I don't know where to get 2" drop brackets. Procomp sells 4" drop brackets.

Wouldn't that require a whole new front crossmember? And at that point...

Sent from V-Tac Inc. Mobile Command Post.

 

[RubberFrog]

You wouldn't need a new crossmember, but the 4" bracket would be too much drop. If he could find 2" brackets (I doubt it) it would be doable.

 

[NJDodger]

You wouldn't need a new crossmember, but the 4" bracket would be too much drop. If he could find 2" brackets (I doubt it) it would be doable.

Coat hangers, duct tape, and a swiss army knife.

Sent from V-Tac Inc. Mobile Command Post.

 

[RubberFrog]

Don't forget the hockey pucks!

 

[quietpeen]

That would work, but I don't know where to get 2" drop brackets. Procomp sells 4" drop brackets.

couldn't Rubberfrog Fabrications make said brackets? LOL

 

[NJDodger]

Don't forget the hockey pucks!

Those and some $0.99 bolts from Harbor Freight worked for my body lift on my unibody XJ. LOL

Sent from V-Tac Inc. Mobile Command Post.