Lamp out problem

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

DBrown21

Member
Joined
Sep 3, 2012
Posts
64
Reaction score
0
Ram Year
2004
Engine
Magnum 3.7
Every single time I take my truck through the car wash the lamp out light pops up on my dash and usually goes away after a couple minutes, but this time it's on for good. So I checked all the lights and it's my right rear tail light works, but it doesn't get brighter when the brakes are applied like the other lights do. The bulb is on, just doesnt get brighter like it is suppose to when the beaked are on. Anyone had a similar problem and fixed it?
 

Stangshcky12

Senior Member
Joined
Oct 26, 2011
Posts
9,046
Reaction score
942
Location
Oshkosh, WI
Ram Year
2007
Engine
5.9 Cummins
Behind the tail lighT is a white housing that is basically a circuit board
They are known to go bad (especially the passenger side)
I have an extra one but it would probably be cheaper for to buy a new one (I can't gaurs tee it works perfectly either)
I think they are about $15-$25
 

KGBIGCOUNTRY

Senior Member
Joined
Jun 29, 2010
Posts
13,307
Reaction score
478
Location
MECH, VA
Ram Year
2004 RCSB/2005 QCSB
Engine
5.7 / 5.7
Yep replace the board. My turn sigles would blow on mine, after the second replacement bulb I put in I changed the board.
 
OP
OP
DBrown21

DBrown21

Member
Joined
Sep 3, 2012
Posts
64
Reaction score
0
Ram Year
2004
Engine
Magnum 3.7
Thanks. I'll replace the board then.
 
Back
Top