So, since I'm doing the retrofit in the oem quads, I'm a little bit confused on which anti flicker harness I want to order, and here's why:
Plug Connections
M-LED Projector: 9006
Low-Beam Harness Inside Quad Housing: H11
Harness Outside Headlight: H13
So originally, from the factory, the quads have a harness inside the housing that plugs into the low beam (H11) and the high beam (9005) then runs out the back of the housing to a male H13 plug. The trucks wiring harness then has a female H13 plug that the headlight housing connects too.
So, do I buy an H11 harness, h13 harness, or a 9006 harness since the M-LED projector has 9006 plugs?
Super confused and I'm usually really good and figuring out what wires and plugs go where but this is my first LED projector install so it's new to me.
Sent from my PH-1 using Tapatalk
What I did is tapped into the H13 male and female plugs and created 2 9006 plugs coming off the truck and coming out of the headlight giving the low and high beams their own separate plugs. Then on the inside, I used TRS’ H11 to 9006 adapter for the low beam and since I have the DRL projector as an additional high beam I used the TRS high beam splitter. Sounds a bit confusing but very easy. Also, all TRS harnesses that are 9006 are also 9005. The only difference between the 2 is an alignment tab and TRS makes theirs universal.
https://www.theretrofitsource.com/high-beam-splitters.html
https://www.theretrofitsource.com/headlight-socket-adapters.html?preselect=49229
Sent from my iPhone using Tapatalk