Ricks Ram
Senior Member
- Joined
- May 1, 2015
- Posts
- 4,411
- Reaction score
- 3,388
- Ram Year
- 2014
- Engine
- Hemi 5.7
In most cases when they turn off after a few seconds it means that all of the codes are not enabled. I recommend going back and double checking to make sure that all codes are activated. Also give the truck time to pick up the codes let it sleep for several Ignition cycles after getting them all added to make sure they take in the BCM.Gents, spent the last hour searching through this thread, awesome info.
I added heated/cooled seats to my RC 3500 Tradesman (seats from a 16 3500 Laramie)
I have the correct switch panel in and when I turn on the heated function or the ventilation function, it will turn on (I can hear the ventilation fan running) but after 10ish seconds it will turn off and until I restart the truck it'll do the lights on (but not functioning) for 5 seconds then off routine.
I also enabled all the soft keys with Alfaobd and it doesn't matter if I use the hard or soft switches same results.
My first thought is the heated seat control module so I have one on the way.
Anyone have any other ideas?
Sent from my SM-G960U using Tapatalk