Yazen
Member
Look for the same colored connectors. IIRC, the green block as the white connectors.
Thank you for the response.
I can't seem to find it, I will look again tomorrow in the day time and let you know.
Y
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Look for the same colored connectors. IIRC, the green block as the white connectors.
There are plenty out there. Just search "90 degree obd extension cable". They are available on eBay and Amazon. I normally use the 1ft or 18" flat cable ones.Oh that's neat! Can you share a link to the extension piece? I like your trick and want ti do it myself. Thank you
Thank you for the response.
I can't seem to find it, I will look again tomorrow in the day time and let you know.
Y
Found them both! Don't know how I missed the second one earlier! Thank you.Look for the same colored connectors. IIRC, the green block as the white connectors.
I have a friend trying to add a factory CD player to the 8.4" radio in his 2018 1500.Since it bypasses the security module for both the CAN C and CAN IHS, almost all modules should be good. The one exception is the radio.
I have a friend trying to add a factory CD player to the 8.4" radio in his 2018 1500.
Will I need the Infotainment bypass to add the icon with AlphODB, or does it have the same limitation?
edit.I have a friend trying to add a factory CD player to the 8.4" radio in his 2018 1500.
Will I need the Infotainment bypass to add the icon with AlphODB, or does it have the same limitation?
yes)Would you need an adapter like obdlink Mk+ to reset parameters?
Now taking orders for RAM Security Module Bypass Harnesses. If you have a 2018 RAM or a 2019 RAM Classic and would like to perform diagnostics or make changes to the modules of your truck using tools like AlfaOBD or AutoEngenuity, this bypass is for you. Cost of the bypass is $55.
In order to facility the ordering of the bypass, I have created a website for the orders. Please visit www.securitymodulebypass.com to order a bypass.
FAQ
Does this allow access to all modules?
It has been tested connecting to the BCM and RFH. Since it bypasses the security module for both the CAN C and CAN IHS, almost all modules should be good. The one exception is the radio. The radio does not directly connect to the either CAN of the truck, it is hung off of a DMZ on the security module to protect the truck's CAN in case the radio would be comprised via the 4G cellular functionality.
Does this work with 1500, 2500, 3500, etc?
There are two different versions. One for the 1500s, and one for 2500s and up.
How long does it take to install and is the install permanent?
It take about 5 - 10 minutes to install. Installation instructions will be provided with your purchase. It can be removed in the same amount of time. The factory OBD2 port can be put back in place in less than 2 minutes without any tools.
What programs have been tested with the bypass?
At this point, AutoEngenuity, AlfaOBD, and Autel have been used with the bypass.
Should I leave the bypass installed at all times?
That is up to you. Installing the bypass does make the truck less secure by enabling the OBD2 port for use with diagnostic and configuration utilities not provided or authorized by FCA. That being said, the harness rewires the truck to be just like all previous model year RAMs. I would recommend that you remove the bypass before taking it to a dealer.
Can I use this on multiple trucks?
Yes. We have sold several of these already to dealers and third party shops who work on RAM trucks.
@DeereGuy
I tried following your link that's posted in the first page...will not open!
I have a 2018 Ram 1500, and would like to ***properly*** update my headlights. Currently have a Morimoto Mopar 2015+ HID low beam kit in, and their XB LED foglights. The HID kit has given me grief since day 1 a year ago, and now I have nothing working on the drivers side at all.
Going to be ordering new HID kit that I'd like to run WITHOUT a relay harness & resistors, and I'm told this is the way to go.
Could you please msg me here, or email at [email protected] so I can get my hands on your harness??
Cheers!
https://www.kaodtech.com/product-page/security-module-bypass@DeereGuy
I tried following your link that's posted in the first page...will not open!
I have a 2018 Ram 1500, and would like to ***properly*** update my headlights. Currently have a Morimoto Mopar 2015+ HID low beam kit in, and their XB LED foglights. The HID kit has given me grief since day 1 a year ago, and now I have nothing working on the drivers side at all.
Going to be ordering new HID kit that I'd like to run WITHOUT a relay harness & resistors, and I'm told this is the way to go.
Could you please msg me here, or email at [email protected] so I can get my hands on your harness??
Cheers!