Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Give mpgrimm2 a shout. He sells a piece that should fix this. It did for my conversion.If anybody has an 18 or up
I need help fixing the 911 issue I figured out a solution send me a message
If anybody has an 18 or up
I need help fixing the 911 issue I figured out a solution send me a message
Give mpgrimm2 a shout. He sells a piece that should fix this. It did for my conversion.
Looking for the same fix for my 18. Last update I saw said it currently can’t be fixed. Need to use a 18 + radio. I’m following to see if anyone responds with a possible solution other than replacing the radio I have now (15 8.4 RA4).
Sent from my iPhone using Tapatalk
I sent you a message I don’t have a possible operation I have a solution
We’re currently running it already in four different vehicle and it’s working perfectly
One of them actually has a Ra3 in a 19
Is Products so far and above everybody else’s they may not be the fastest to get there but I can promise you they’re of the best qualityI recently ordered conversion parts from @Mpgrimm2 for my 2017 Ram to install an RA4 NA radio. He supplied the extended HVAC harness, 911 plug, and the control module. The conversion was an easy install with the parts I that I got from him.
I wouldn't hesitate to order from him again. He answered my questions and was very helpful.
- Donnie King
What year truck? 1500?Where did up get your 8.4 Upgrade and 'ATC' setup from?
(Infotainment? EDIT: Yep, see original post here and see here.) (thank you)
Support issue raised... no reply yet.And what did Infotainment say about the issue? One would assume since they were paid good money for the upgrade they would provide support to their customer.
1) Basically you need to go back to the dealer and have them flash you're truck back to stock/ Single Zone MTC... Make sure everything is working and then do your upgrade with OBDgenie (they can leave the mirror sales codes in there).
Unfortunately this is a big limitation with the Genies vs AlfaOBD.... No way to verify that they actually flash/change settings correctly and no way to revert back to stock without a trip to the dealer.
2) I can guarantee your hvac wasn't working correctly with the Infotainment ATC setup before ... even if the temp slider works correctly with their Single Zone ATC changes.
Here's how you can verify it's not working correctly ...
Use the on screen menu or Auto button to take the system out of Auto mode. With the truck running and the A/C light on (ie manual cooling), pop the hood and look at the hvac compressor clutch... It will be engaged. Now have someone turn off/disable the 'A/C' button while watching the compressor clutch... It should disengage from the compressor!! ... but with their setup it never does and stays engaged/runs continuously ... Even in the winter! (Wearing out your compressor!)
Cheers!
M² Mods.
(via Tapatalk App)