Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
I don’t see this when I open the app. I am so lost.Can no longer edit thread. Maybe the mods can do something about this?
Auto Tilt Mirrors in Reverse Thank you PNUTLT1
Driver Memory Mirrors Present
Select "Yes"
Passenger Memory Mirrors Present
Select "Yes"
Tilt mirror in reverse
Select "Yes"
Also
Fog lamps with high beams
Fog lamp dropout enable
Select "No"
Make sure you read through the first post carefully about how make a back up of the vehicle configuration.I don’t see this when I open the app. I am so lost.
I was able to due the back up. Now the thing is I don’t know which body controller to log in because there is more than one for the 2017.Make sure you read through the first post carefully about how make a back up of the vehicle configuration.
Those setting you quoted above will be found in the Body Control Module.
I am stupid you have done what I am trying to do. I need pic by pic or a phone call and get walked through.I've been using this dongle. Works for everything so far. OBDLink LX OBD2 Bluetooth Scanner, the green one. Auto down windows, Trans relearn, fogs with highbeams, factory trailer brake controller install, load screen on uconnect, lowered tpms value.
I am stupid you have done what I am trying to do. I need pic by pic or a phone call and get walked through.
Mine is a 2017 ram sport 1500 4x4 hemi
You don’t need to reset the rf hub for anything on the 2019+ Ram HDs. The PIN is useless to you. Once you update the pressure thresholds, you’re all set.I have a Ram 2020 2500. I followed the steps from the link above to reset my TPMS. When I get the the step where you "Reset/Replace RF-HUB" it is asking me for a five digit pin. The screenshots show a four digit pin being required (which I tried, it doesn't work). I've talked to multiple dealerships trying to find a five digit pin code for this without success. Has anyone else had this problem? Why is it asking me for a five digit pin instead of a four digit pin?
Has anyone done this on a 2020? When I follow the steps through "Program Tire Size" and hit "next" or "start" it just immediately says "procedure failed." As far as I can tell I've followed all the steps correctly. Has anyone else run into this?
could you point me to the directions to enable the security alarm ?Hello. I am new to this forum and new to Ram ownership. I recently got AlfaOBD and used it to enable the security system/alarm on my 2015 Tradesman 5.7l
It worked great and now I am looking for more things I can do. BUT I am having a hard time sifting through everything to find good ones. Does anyone have any suggestions?
EDIT: I should also note that I recently installed a K&N Series 63 Cold Air Intake. Other than that, I believe it is bone stock.