lifted

  1. AHoug723

    What brand lift?

    So im sure im probably beating a dead horse by asking this but ive been looking at all these different companies that make lifts for our trucks (i.e. rough country, zone, bds, superlift, pro comp, etc.) And the only ones i can find that has another option for the 6 inch lift besides a strut...
  2. Mvansciver

    Ram 1500 6” lift new struts question?

    I have a 2012 1500 with a 6” zone lift kit with 35x13.5x20 toyo rt’s. I just replaced the lower control arms with moog arms that have new balljoint and bushings pre installed. I also am replacing my stock strut that has the lift spacer on it with rough country n3 pre loaded struts for a 6” lift...
  3. Mvansciver

    6” Lifted Ram 1500 New Strut Question

    I have a 2012 1500 with a 6” zone lift kit with 35x13.5x20 toyo rt’s. I just replaced the lower control arms with moog arms that have new balljoint and bushings pre installed. I also am replacing my stock strut that has the lift spacer on it with rough country n3 pre loaded struts for a 6” lift...
  4. BrosAuto

    Only a RAM owner can appreciate this! Post your RAM ONLY Owner pics

    I figured only ram owners might appreciate this pic! POST YOUR PICS BELOW! I also have a youtube channel now. youtube.com/c/BrosAuto
  5. WamBam

    Possible ball joint issue

    I have a 2012 1500 with a 4inch procomp spacer kit with bils up front set to to 1.2 to level out the truck. my steering wanders left and right when I drive and im thinking that it could be blown ball joints. does anyone have any insight as to what it could be?? ill post some pictures of the...
  6. BrosAuto

    Has anyone seen this Wrecked Megacab Ram 3500?

    This was one heck of a crazy project!
  7. B

    Rack and pinion split in half!

    Has anyone had any issues with their rack and pinion body cracking?
  8. scooterderek

    6” superlift and bilsteins questions

    So I just installed the 6” superlift on my 2009 1500. I have my bilsteins at the setting above stock which is .7” . And even with the included diff drop bracket and bils at .7 my cv angles are pretty terrible AND my truck still has 1.5” of rake. I really want to bring my bilsteins up a little...
  9. H

    Help with choosing a tire height!

    I have a 2019 Ram 1500 CLASSIC Hemi 5.7l 4wd 8-speed. I am going to lift It a total of 9”-10” and also will be putting on 24x14s. I am wondering if I should buy 37x13.50R24s or some variation of 40s. PLEASE SHARE ANY AND ALL OPINIONS! THANKS
  10. T

    Customization Shops

    I have a 2018 2500, with 6.7, live between DC and Baltimore. Looking for a local shop that can put a leveling kit/wheels/tires on the truck. Any recommendations appreciated.
  11. Olkutty

    2018 lifted 4x4 1500 Express

    I bought it new. I’m not a fan of chrome on trucks, so I went with the Express. It doesn’t have all the bells and whistles I wished it had, but I love it. I’ve owned several different colored Rams over the years, but I’ve always wanted a black one. I finally got it last year.. Zone 4” lift 22”...
  12. Eddy Money

    02 - 05 ram 1500 lift, zone vs BDS

    Looking at zone 5" lift for a 05 ram 1500 4x4 but im wondering if it is woth it to get the 6" BDS instead? Worth the extra $1000? Seems the options are a little more limited for the 02-05.Anybody have them for the 02 - 05 1500s and have comments or opinions? Thanks
  13. D

    35" Tires For Towing

    I've been putting off getting new 35x12.5R20 tires for my 2015 6" lifted ram but I can't anymore since I just got a 30' camper. I saw a couple tires that mentioned towing in their description but I was wondering if anyone has any tire recommendations. I'm looking on towing the 7000# camper...
  14. Kepler

    CV joint issues?

    I have a popping sound when I press the accelerator and sometimes when I’m turning. For the accelerator it doesn’t matter if I am going up or down hill or what speed I’m traveling, if I take my foot of the gas for a second then reapply I can hear the single popping sound. Also if I come to a...
  15. SamP

    Thinking about leveling my truck. But I’m ignorant...

    2017 Ram 2500 crew cab. Talked to a Les Schwab guy who seemed pretty knowledgeable about going with 35’s and some new rims. He said I could go that high with stock offset without leveling/trimming/etc. true? Also, he said I can’t get a level with something like the Bilstein 5100’s and I’d have...
  16. wbsnow93

    Busted Bilstein 5100 Shocks

    2018 Ram 1500 crew cab 5'7" bed My front drivers side bilstein shock appears to have broken through the top mount of the strut assembly. I've had them installed for 8,000 no problems at all at the highest 2.8 setting. I have towed a trailer before as well My most recent trip was from San Diego...
  17. michael kelly

    Front leaf spring conversion

    Has anyone converted their second gen 4x4s to leaf springs on the front end?
  18. W

    Rear driveshaft spacer?

    Hey everyone. I have a bit of a big project. I decided to go bigger than the 6 inch rough country lift kit that I currently have sitting in my garage. I decided to go another few inches on top of that. I know everything I need to accomplish this lift and I have my list planned out. The only...
  19. Elijah

    Q to those who purchased new lifted trucks with 35's and 3.21, question about AT shifting to 8th

    Over these past years dealerships have been selling lifted trucks. Based on the window stickers I've seen they have come with either 3.21 or the 3.92 gearing. I have a question Have you noticed when on the highway it not seeming to shift to 8th a lot? It is so odd. I drive the same way to...
  20. B

    Tire Fitment Help on 6 inch lift

    I have a 2007 1500 with a 6 inch lift on it. right now im running 37x12.5 on 20x9s 0mm offset. im looking to upgrade to to 20x12 with a -44mm offset and either 37x13.5 or 38x13.5. anyone know if they would fit and if you have pics of your truck i would love to see them. i have an aftermarket...
  21. B

    Tire size for 3” front and 2” rear lift

    So I have a 2015 1500 and I was wondering what is the most aggressive tire size I could run on 20” rims without rubbing. I have stock wheels and tires right now and I just need something to make the truck look a little bigger and better.
  22. B

    Aftermarket bumper that works with fender flares?

    Looking for any options for a bumper that works with pocket flares? My pocket flares wrap around the headlight and most bumpers I've seen also wrap around the headlight and stick out an inch or two. Need one that would be flush with head light so that my flare will still work. Any...
  23. D

    N-Fab AdjustStep or comparable?

    Hi everyone, I’ve been looking for a set of N-Fab AdjustSteps for my ‘18 Ram 1500 Crew (ASD1589CC) but since they are discontinued it’s been tough to find! Does anyone have any recommendations for steps that are lower than typical (without going powered) so that my elderly mother can get in my...
  24. W

    37's and 3.21. Here I go again...

    Hey everyone. I've finally decided I want to do a six inch lift with 37's on my 2015 Ram 1500. I see posts that say it is an absolute dog and those few rare posts that say 3.21 with 37's don't seem to be an issue whatsoever. I feel like I am way too stuck on 37's and how nice they look. But I...
  25. Robert Pratt

    2011 1500 Front Stabilizer Bar Options

    Looking for options to replace front stabilizer bar (4wd). Long story short on the driver side where the sway bar link mounts to the bar it cracked in half. Finding an aftermarket front stabilizer bar (fsb) without going to the dealer is proving to have virtually no options. Just wanted to see...
Back
Top