Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
I think I’ve tried that already and I didn’t work. But I can’t remember, so I will try it.I think I would try to just set HID to yes and no other setting to start with!!!
Nick,My Hikari 9006 bulbs have been in for 1 year now and haven't failed yet but I mainly use them for back roads, inclement weather and highway driving.
They get sprayed at the car wash every tank of gas...
Sent from my HTC U11 using Tapatalk
Yes, but originally I had them installed without Alfa and they worked no problem.
No luck. Still got the error.I think I would try to just set HID to yes and no other setting to start with!!!
No luck. Still got the error.
Not yet. Too much going on today. It’s going to have to be a next weekend project. I just messed with some Alfa settings today. Next weekend I will pull it apart and go back to factory settings and start going one by one and hope it’s an easy fix.Did you disconnect the resistors
Sent from my iPad using Tapatalk
It's weird but it does seem that every truck responds differently to upgrades
2018 Ram 2500 6.4L Hemi Tradesman
My G2's were plug and play 0 errors. 2017 with factory quad. I have changed nothing in alfa. I want to upgrade to Hikari ultras but I'm sure I'll then open a world of errors. Have most of you getting errors changed the bulbs or are you getting errors with the G2 as is?
I didn't realize that they had resistors in them already but was getting that same parking light out error, so i added in a load resistor into the parking light wire and havnt had one error show up since I did that couple months agoNot yet. Too much going on today. It’s going to have to be a next weekend project. I just messed with some Alfa settings today. Next weekend I will pull it apart and go back to factory settings and start going one by one and hope it’s an easy fix.
I'd suggest soldering them in though cause connectors dont last long they get corrodedNot yet. Too much going on today. It’s going to have to be a next weekend project. I just messed with some Alfa settings today. Next weekend I will pull it apart and go back to factory settings and start going one by one and hope it’s an easy fix.
Ya I'd like to know if that works cause Im interested in getting the alphaobdFor those with parking light out on the Gen2 lights, try using Alfa to set "CBC Features - LED Front Park/Marker Lamps Present" to "Yes" and report back if that works or not.
You kept halogen bulbs?
Did you you connect the DRL setup? If so, how did you connect it?
Do you have the basic 3.5” instrument cluster, or the premium 7” cluster?I guess so I didn't even know what they came with. I kept the bulbs that came with the G2. Plugged in like 2 plugs and ran the DLR with the provided wire they give you that goes from battery, to fuse 66 tap, to the lights. Everything works perfect
Do you have the basic 3.5” instrument cluster, or the premium 7” cluster?
That’s most likely why you’re not getting the errors, as the premium cluster picks up on them and displays them.3.5 but planned up upgrading soon
That’s most likely why you’re not getting the errors, as the premium cluster picks up on them and displays them.
Interesting maybe I shouldn't upgrade until you guys figure it out. Which is annoying but so is random bulb out errors