Hood Latch Assy for the Remote Start Kit wiring question ...

[KevinInVT]

So I am trying to get oem remote start and I have done all the Alfa programming but I appear to not have anything pinned at #11 on the BCM connector. Is there a way to ground prior to that connection or do I need to pin a wire into #11 and run that to ground?

 

[Ramagain]

Wanting to do this mod. I have the wiring from the BCM but no wires out of the second half of the connector. Is there a harness available that I can pin into the back half of the connector that would allow me to add the hood latch?

 

[Ramagain]

my body connector had these wires in position 1 and 2 on the body side of the BCM connector, but nothing on the output side. I have pinned the matching wires from a harness I built to the opposite side? Does it make sense that on my 2013 these wires are in a different spot than what's pictured previously in this thread?

 

[Ramagain]

Here's my connector and the added harness for the hood switch.

 

[Manduke]

I have a 2021 ram 5th generation where can I find that connector at I seem not to find it by the battery or underneath the power distribution box anyone knows where is this connector at for my hood ajar wires

 

[Manduke]

I have a 2021 ram 5th generation where can I find that connector at I seem not to find it by the battery or underneath the power distribution box anyone knows where is this connector at for my hood ajar wires