- Joined
- Nov 22, 2019
- Posts
- 192
- Reaction score
- 179
- Location
- Bellingham, WA
- Ram Year
- 2015
- Engine
- 6.4 Hemi
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
It should work no issues. Also, I programmed a 2019 cluster in my 2014 for someone.The 2018 and 2019 classic ones are nice bit the P for the park position blinks when in park, the rest of the gears and features show and work fine as far as I know. (I've installed every year except 2019(yet) on my 2014 Big Horn 1500)
What instill don't know is if I could program the mileage on a diesel cluster plugged into mine lol, haven't dared to
It should work no issues. Also, I programmed a 2019 cluster in my 2014 for someone.
The going rate for premium clusters at every salvage yard I've seen is $150-$165 shipped. I've never paid more than that from 2014-2019...
Sent from my HTC U11 using Tapatalk
Yes that diagram will work or you can get one of my harnesses. Send me a message for details if interested. (Click on my avatar profile & start conversation).I'm in Canada and have 2017 Ram 1500 - 7 speed Fan model and have obtained:
- 8.4 Uconnect Radio VP3-CA / p/n: 682270664AD
- 8.4 bezel 1UJ97DX9A (I can obtain 1UJ96DX9AE if better)
- A/C Heater Module P68236772AB
1. Are there any Canadian options to purchase a conversion harness?
OR
2. For DIY route:
- Is this the diagram I follow for my setup? https://www.flickr.com/photos/150847015@N08/34906198204/?
- I have salvaged the 3 required connector shells (8 pin to hvac bezel, 24 pin to existing truck harness and 24 pin to hvac module) which all have wires and pins in them. Can I get new male, female connector pins and reuse them?
- Mouser has 10K minimum purchase amounts for 'TE Connectivity' parts: 1393366-1, AMP 1123343-1, AMP 1376109-1
Could someone host or point me to UCONNECT_8.4AN_RA3_17.11.07_MY13 (2013 Ram 1500). I can get the RA4 but it is not compatible. I need it to upgrade to 18.xx
Thanks in advance.
No pic of back. RA4 S/W is not compatible (says it isn't on upgrade screen)
I thought you needed RA3 firmware? What file did you download?No pic of back. RA4 S/W is not compatible (says it isn't on upgrade screen)
UCONNECT_8.4A_RA3_17.43.01_MY13_NAFTA - Not compatable
Cant find UCONNECT_8.4AN_RA3_17.11.07_MY13
Must have had the file name messed up. Need UCONNECT_8.4A_RA3_17.11.07_MY13
Must have had the file name messed up. Need UCONNECT_8.4A_RA3_17.11.07_MY13