g00fy
Senior Member
- Joined
- Aug 30, 2015
- Posts
- 253
- Reaction score
- 108
- Ram Year
- 2019
- Engine
- Cummins 6.7
With the help of @Jimmy07 & @AllMoparParts.com I just went through the process of adding 360° surround view to my 2019 tradesman 6.7, and I got all the hardware installed, all the correct settings selected in Alfaobd and all the cameras are working. However 360 view itself will not work, it just shows black around the truck, when I clear the faults in the canbus I get 360 view for a second then it goes blank again.
The errors I've pulled from the canbus say there's no valid calibration, so I've tried several times to run the calibration procedure, but the front camera always fails.
Does anyone have any experience recalibrating the surround view system? Or have access to a service manual that might better explain the details of the calibration procedure? I'm wondering if I'm missing something and I keep doing the calibration wrong?
Here's a copy of my logs from Alfaobd:
In the first log there's 2 residual codes from when I was still hooking up the cameras, so I cleared them and they haven't come back, only the calibration errors keep coming back.
Reading faults for: Central vision processing module
___________________
Faults reported:
9/4/2020 9:18:04 PM
Faults found.
U0265
B23C5
B217A
U0264
___________________
Error code: U0265
Lost Communication with Front Camera
Last test completed positively
Error intermittent
Failure warning lamp 'ON': Not requested
Error code: U0265
Lost Communication with Front Camera
Last test completed positively
Error intermittent
Failure warning lamp 'ON': Not requested
Error code: B23C5
Front Camera
Performance or incorrect operation
Last test completed positively
Error intermittent
Failure warning lamp 'ON': Not requested
Error code: B217A
Rear Camera
Performance or incorrect operation
Last test completed positively
Error intermittent
Failure warning lamp 'ON': Not requested
Error code: U0264
Lost Communication With Camera Module - Rear
Last test completed positively
Error intermittent
Failure warning lamp 'ON': Not requested
___________________________
'Clear fault codes' command sent
___________________________
Reading faults for: Central vision processing module
___________________
Faults reported:
9/4/2020 9:19:10 PM
Faults found.
B23C8
B2286
___________________
Error code: B23C8
No code description found
Missing calibration
Last test failed
Error present
Failure warning lamp 'ON': Not requested
Error code: B2286
Calibration Not Learned / Lost Calibration
Last test failed
Error present
Failure warning lamp 'ON': Not requested
Error code: B23C8
No code description found
Missing calibration
Last test failed
Error present
Failure warning lamp 'ON': Not requested
___________________________
'Clear fault codes' command sent
The errors I've pulled from the canbus say there's no valid calibration, so I've tried several times to run the calibration procedure, but the front camera always fails.
Does anyone have any experience recalibrating the surround view system? Or have access to a service manual that might better explain the details of the calibration procedure? I'm wondering if I'm missing something and I keep doing the calibration wrong?
Here's a copy of my logs from Alfaobd:
In the first log there's 2 residual codes from when I was still hooking up the cameras, so I cleared them and they haven't come back, only the calibration errors keep coming back.
Reading faults for: Central vision processing module
___________________
Faults reported:
9/4/2020 9:18:04 PM
Faults found.
U0265
B23C5
B217A
U0264
___________________
Error code: U0265
Lost Communication with Front Camera
Last test completed positively
Error intermittent
Failure warning lamp 'ON': Not requested
Error code: U0265
Lost Communication with Front Camera
Last test completed positively
Error intermittent
Failure warning lamp 'ON': Not requested
Error code: B23C5
Front Camera
Performance or incorrect operation
Last test completed positively
Error intermittent
Failure warning lamp 'ON': Not requested
Error code: B217A
Rear Camera
Performance or incorrect operation
Last test completed positively
Error intermittent
Failure warning lamp 'ON': Not requested
Error code: U0264
Lost Communication With Camera Module - Rear
Last test completed positively
Error intermittent
Failure warning lamp 'ON': Not requested
___________________________
'Clear fault codes' command sent
___________________________
Reading faults for: Central vision processing module
___________________
Faults reported:
9/4/2020 9:19:10 PM
Faults found.
B23C8
B2286
___________________
Error code: B23C8
No code description found
Missing calibration
Last test failed
Error present
Failure warning lamp 'ON': Not requested
Error code: B2286
Calibration Not Learned / Lost Calibration
Last test failed
Error present
Failure warning lamp 'ON': Not requested
Error code: B23C8
No code description found
Missing calibration
Last test failed
Error present
Failure warning lamp 'ON': Not requested
___________________________
'Clear fault codes' command sent