Transmission service question

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Bacon6

Junior Member
Joined
Dec 4, 2017
Posts
11
Reaction score
0
Ram Year
2015
Engine
5.7 Hemi
I have a 2015 ram 1500 bighorn w/5.7 hemi 4x4 with aprox 170,000 mi and 8 speed trans, back around 90,000 i had the transmission serviced so today i started looking into having it done again. I called a Ram dealer and the service department told me that being a sealed transmission they didn’t recommend having it done, puzzling to me, so I called another dealership Same answer, with that i called at least 5 different transmission shops, most would do it but several again said they didn’t recommend it, what gives here I thought this was something that should be done every 100k give or so. Should I have it done or not and also should i have the Pan/Filter replaced also ? They are asking anywhere from $850. To 1200. Thanks
 

Grams

Senior Member
Joined
Oct 4, 2024
Posts
1,125
Reaction score
1,833
Location
Texas
Ram Year
2024 & 2015
Engine
6.7 Cummins & 5.7 Hemi
The shop that performed the service at 90K won’t do it again..?
 

Burla

Senior Member
Joined
Apr 28, 2012
Posts
27,671
Reaction score
58,030
Ram Year
2010 Hemi Reg Cab 4x4
Engine
Hemi
I'd dyi as you cant even check the fluid level after some shop does it. A while back the Japanese made shaken law, it was a scam to make everyone buy a new car every 5 years. As it turns out it was a huge success for their gov't, the envy of the world, Japan is the only developed nation where auto manu is the number one industry. Ever since their success USA and euro have tried to make cars disposable. Nothing gives govt loads of freaking sweaty cash like auto sales, like 10 grand per vehicle. So they build stuff so you don't service it and it breaks sooner then older stuff. For now their is a work around = dyi. So either dyi or let it break and program in so the govt can take loads more of your money. 170k miles, Japan would have an arrest warrant on you for being a bad citizen, lol.
 
OP
OP
B

Bacon6

Junior Member
Joined
Dec 4, 2017
Posts
11
Reaction score
0
Ram Year
2015
Engine
5.7 Hemi
transmission was serviced in another state unfortunatel
 

Grams

Senior Member
Joined
Oct 4, 2024
Posts
1,125
Reaction score
1,833
Location
Texas
Ram Year
2024 & 2015
Engine
6.7 Cummins & 5.7 Hemi
I'd dyi as you cant even check the fluid level after some shop does it. A while back the Japanese made shaken law, it was a scam to make everyone buy a new car every 5 years. As it turns out it was a huge success for their gov't, the envy of the world, Japan is the only developed nation where auto manu is the number one industry. Ever since their success USA and euro have tried to make cars disposable. Nothing gives govt loads of freaking sweaty cash like auto sales, like 10 grand per vehicle. So they build stuff so you don't service it and it breaks sooner then older stuff. For now their is a work around = dyi. So either dyi or let it break and program in so the govt can take loads more of your money. 170k miles, Japan would have an arrest warrant on you for being a bad citizen, lol.
Manufacturing is less than 20% of Japan’s income, and Half of THAT is Electronics, small-appliances, and personal devices, and a good-portion being Textiles. The Largest area of Japanese Industry is in “Services”.

The rest of your comment also ignores those agricultural and petroleum producing countries…. good reasons to question much of the post as not being well-researched.
 
Last edited:

EdGs

Senior Member
Joined
Nov 29, 2020
Posts
5,561
Reaction score
11,802
Location
FL
Ram Year
2015
Engine
Hemi 5.7L
Filter is part of the OE pan.

If you can DIY, you will be way ahead of the game. The process is a little involved and such, but completely doable.

PPE makes an excellent aluminum pan with a replaceable filter, and similarily priced to the OE plastic pan.

Plenty of threads and help here if you decide to DIY.
 

Burla

Senior Member
Joined
Apr 28, 2012
Posts
27,671
Reaction score
58,030
Ram Year
2010 Hemi Reg Cab 4x4
Engine
Hemi
Manufacturing is less than 20% of Japan’s income, and Half of THAT is Electronics, small-appliances, and personal devices, and a good-portion being Textiles. The Largest area of Japanese Industry is in “Services”.

The rest of your comment also ignores those agricultural and petroleum producing countries…. good reasons to question much of the post as not being well-researched.
Read the post grams I was referring to historical, it was a history of why we build vehicles like isht today and have been for well over a decade.

Shaken law = 1951
Gas crisis 1973 and 1979
Led to Japan running the show - gas mileage engines.
1980's through 2000's Japan number one industry - auto manufacturing
today auto industry is the largest export = power.
 

RamDiver

Senior Member
Joined
Jan 23, 2022
Posts
5,723
Reaction score
12,083
Location
Marlborough, Ontario Canada
Ram Year
2021 DS
Engine
Hemi 5.7
I have a 2015 ram 1500 bighorn w/5.7 hemi 4x4 with aprox 170,000 mi and 8 speed trans, back around 90,000 i had the transmission serviced so today i started looking into having it done again. I called a Ram dealer and the service department told me that being a sealed transmission they didn’t recommend having it done, puzzling to me, so I called another dealership Same answer, with that i called at least 5 different transmission shops, most would do it but several again said they didn’t recommend it, what gives here I thought this was something that should be done every 100k give or so. Should I have it done or not and also should i have the Pan/Filter replaced also ? They are asking anywhere from $850. To 1200. Thanks

Read up on the PPE +2 quart pan with replaceable filter assembly.
The OE pan is a plastic disposable POS (can't be reused) that should never be installed on a truck.

I plan to change the pan at about 60K miles and fluid every 50-60K miles as per the manufacturer, ZF.

Either do the work yourself, or find a small competent tranny shop willing to follow the green sheet and allow you to watch. That's my plan.


8 sp trans fluid change.JPG


There are several threads on this topic and a few YouTube videos.
The most important aspect that is missed by many videos and tranny shops is to level the tranny, not the truck.

Levelling the tranny requires the rear end to be lifted about 8-10".
Changing the fluid regularly, as per ZF, is a smart idea if you plan to keep your truck working.
Not changing the fluid is farm-animal stupid, no disrespect to farm animals intended. :cool:

.
 
Last edited:

Grams

Senior Member
Joined
Oct 4, 2024
Posts
1,125
Reaction score
1,833
Location
Texas
Ram Year
2024 & 2015
Engine
6.7 Cummins & 5.7 Hemi
Read the post grams I was referring to historical, it was a history of why we build vehicles like isht today and have been for well over a decade.

Shaken law = 1951
Gas crisis 1973 and 1979
Led to Japan running the show - gas mileage engines.
1980's through 2000's Japan number one industry - auto manufacturing
today auto industry is the largest export = power.
From Google: “In the 1980s, Japan’s leading and most dominant industry was advanced electronics and semiconductor manufacturing, ..”
From AI: “In 1986, Japan officially surpassed the United States to become the world's leading supplier of semiconductors. Brands like Sony, Panasonic, and Hitachi revolutionized global markets with consumer electronics like the Walkman, while Nintendo dominated the emerging home video game industry”

While Toyota and Honda became World Leaders in automobiles…they were not Japan’s largest leaders.

Toyota was Already an up-and-coming small engine/automotive PRIOR to the ‘73 oil embargo. (I was actually a Toyota New Dealer technician in 1971/72…as well as an owner at that time. I am somewhat familiar with that side of the discussion.)
I was also a part-owner of a flight-school in Houston from ‘73 onward, and our clients happened to be young Japanese student and advanced pilot applicants. We obtained our Japanese students thru the Dr. Sutow -family references, which included members of the Suzuki and Fuijita families.
I am not attempting to denigrate your beliefs…I’m only offering to correct what I believe to be a misimpression.

The “shaken” law was not designed to force people to buy new cars every 5 years. (In 1951 very few Japanese even owned private vehicles. Japan was and is-still, heavily reliant upon public transportation. But the U.S. occupation forces required new vehicle traffic laws and many new laws were introduced at that time under U.S. military governorship. It is a vehicle-inspection requirement to keep vehicles safe and operational, not too different than many such laws in other nations and U.S. states, and it even allows owners to self-inspect their vehicles. it also only applied to larger cars and engines, not small ones. It is sensible and addresses brakes, suspension, lights, and is actually considered somewhat lax on emissions.

 
Last edited:

Burla

Senior Member
Joined
Apr 28, 2012
Posts
27,671
Reaction score
58,030
Ram Year
2010 Hemi Reg Cab 4x4
Engine
Hemi
You sure are simple, I was trying to encourage the guy to do his own flush as it's literally the only way to know if it was done right. I'm sure there is a dipstick joke here.
 

MarshRam

Senior Member
Joined
May 24, 2017
Posts
2,296
Reaction score
1,561
Location
Florida
Ram Year
2014 SLT 4x4, 2012 ST
Engine
Hemi 5.7
@Bacon6 This is what I'm doing on my 8 speed for the first time (137K miles). I purchased the Mopar fluid and pan. Yes, you need to replace the pan IMO, it has the filter built into it. You want that new filter! I really wanted to do it myself. After watching what I perceived to be the correct process, I realized I would really prefer a lift to do it. Not saying you can't do it without it, it just seemed safer and ensures it's level. I just don't personally like the idea of starting my truck up on jack stands, switching gears around and jumping in and out and laying under it while it's running. Guy's do it all the time though! There has to be a small shop that will do it for you.

I bought what I needed awhile back, so don't recall exactly how much I paid, but I'm thinking $350ish for the new pan and around a hundredish for the fluid. So, $400-$500 or so. Local smaller shop will do the labor for $230 out the door. I'm in $650-$750 or so. I'm confused about the dealership refusing, some will gladly do it for $1k+ from what I have read. It seems this is one of those trucks your looking to get 300K+ miles out of. I don't care what the dealership says, I can't wrap my head around pulling that off without ever changing the tranny fluid. Maybe if you never towed anything, IDK. What I do know is fluids break down, this is almost kindergarten physics101. They do claim lifetime transmission, but lifetime is not defined whatsoever, so that's a pointless claim. IMO, the definition of lifetime to them is the 100K mile warranty and that is not explicitly defined by them and passed to us as valuable information. LOL. It's just part of the planned obsolescence game IMO.

My two cents; to save a little, just get the parts yourself and keep searching for a shop that will do it. If you are hesitant about not having a dealership do it, I get it. There's no guarantee my plan won't go real wrong. But the reality is, if the dealership or anyone else does it and it goes wrong, they'll claim no fault, after all, it's a lifetime transmission as DEFINED by the manufacturer, you weren't supposed to change it. LOL. Good Luck, if my tranny is wrecked after said plan, I'll report back!
 

06 Dodge

Senior Member
Joined
Jan 4, 2022
Posts
2,847
Reaction score
3,407
Location
Forest Grove, Oregon/soon Osage Iowa
Ram Year
2022
Engine
6.7L CTD
I have a 2015 ram 1500 bighorn w/5.7 hemi 4x4 with aprox 170,000 mi and 8 speed trans, back around 90,000 i had the transmission serviced so today i started looking into having it done again. I called a Ram dealer and the service department told me that being a sealed transmission they didn’t recommend having it done, puzzling to me, so I called another dealership Same answer, with that i called at least 5 different transmission shops, most would do it but several again said they didn’t recommend it, what gives here I thought this was something that should be done every 100k give or so. Should I have it done or not and also should i have the Pan/Filter replaced also ? They are asking anywhere from $850. To 1200. Thanks
Sad to hear stuff like this, my local dealer here in Oregon would have asked when would you like to make and appointment for us to service your transmission.....
 
Back
Top