Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
ThankyouPart 1 cabin Temp sensor harness
Cabin Temp sensor
Program via AlfaOBD for dual ATC, wait, then single Zone ATC
M² Mods.
Got this sorted out finally. All the wires where slotted properly, but there may be an issue with the terminal for the recirc door, or the pin on the module.Definitely check the harness. It's very easy to get it pinned incorrectly and I have several small details I do during a build to help keep me from making a mistake. Getting the pins back it is tedious. If you're 100% confident in the harness... Then the module would be next.. especially if it was used.
M² Mods.
Part 1 cabin Temp sensor harness
Cabin Temp sensor
Program via AlfaOBD for dual ATC, wait, then single Zone ATC
M² Mods.
Got your cable thanks much , installed programmed to dual atc , right now I can’t change the up or down for hot or cold and no temp display on screen yet .
When you say set to auto atc then wait “ does this take a while like maybe over night “ ?
Thanks
Sent from my iPhone using Tapatalk
I think its 17 up that only have 3 fakras. My 16 has 4. 16+ supports both cameras but its wired in at the main connector and not a fakra. The 5th gen radios have a digital input for the camera so those do use a fakra for the connectionDo you all 16 and newer radios
Only have three Fakra connectors if they have support for dual cameras
I know where 16 radio is but it has the four Fakra but it’s out of a car so I’m wondering if it’s actually a 15 radio
Who were you trying to message? You just click on the name of the person and it will bring up their profile and you can direct message from there. That bezel from infotainment is their custom bezel and to my knowledge no one else makes or sells it. It saves you the hassle of finding all the other components needed for the conversion and allows you to use your existing hvac controls.So I don't know how this site works exactly tried to send a direct message to you I have a RA4 out of 2016 rebel I got the bezel from it thinking it would work but after reading seems like an easier route to try and get the custom bezel with the single climate control and all harness is this something you offer if so how much would this be I see infotainment has it listed for about $600 just wondering if there's a cheaper route because I find that the $300 model with the volume control and stock climate control just doesn't look right. Thank you.