2014 Ram 1500 5.7 MDS throwing P0303 Code

[crackerjack1957]

I probably would have made room for some JBA Longtubes in the budget, if I could have found a Y pipe when I first started sourcing parts. Seems to be sold out everywhere I looked because they were apparently discontinued. Then I kept reading about issues with engine bay temps and knock sensors causing other peoples trucks to jump timing. Since this is my daily driver for the next couple of years I decided to be a little more reserved. Probably down the road, when I am not relying on this as my daily I will go FBO.

Since you are not doing headers you would probably benefit more from the .5HL V2 vrs the 1.5HL V2

 

[14Deebo]

Since you are not doing headers you would probably benefit more from the .5HL V2 vrs the 1.5HL V2

I'm getting the low lift cam.

From Greene Racing's page: "
Stage 1.5 LL VVT camshaft line.

209/226 just like the Stage 1.5 HL v2 but with slower ramp rates and lower lift to be safe with stock springs. Lift will be .550/.550"

 

[crackerjack1957]

I'm getting the low lift cam.

From Greene Racing's page: "
Stage 1.5 LL VVT camshaft line.

209/226 just like the Stage 1.5 HL v2 but with slower ramp rates and lower lift to be safe with stock springs. Lift will be .550/.550"

Okay I missed that.......looks good.....should be a good 1.
Jay wouldn't steer ya wrong........LoL

 

[SeanAbel]

Hello, I am having P0303 code also. The truck is runnig fine no hesitation or any miss fires. I have changed the spark plugs changed coil positions(no change). Even had a mechanic do a compressions test(good compression). I still getting P 0303 code. The mechanic pulled the valve cover found the exhaust on #3 not moving as much as the rest of the valves. I am hoping that is the problem. Why would the truck still run good if the exhaust valve is not working properly ??