Ghost Ram....hope you do not mind a couple of questions.........
1) How to you close/backout of the program when finished? In your screen shots there are four round buttons on the top right. What are they? One of them allows you to exit the program?
I've always tapped the key icon at the bottom which brings you back to the disconnect screen then tap disconnect. Then I press the back key on the Android device to get the exit screen and tap exit. The soft buttons at the top are the preferences on the left, next is the about screen, then the tools screen where you can send debug logs, upload config info to Google Drive and so on, and the last button is the help web page.
2) When you click on an "option" in the menu (example: DRL's) you said it will confirm your current settings in the upper right box. You then can make your selection and click NEXT. Now if your option selected is the same as the current configuration it will say START again. So if you are leaving it the same and make no change, do you then press START? And takes you back to the menu list?
If you have the same setting as selected, you're right it says "start" instead of a change of "next". You can simply back out unless you want to make a change.
3) I have a 2017 2500 Cummins (like you I believe). You had previously posted a file of the settings from your Ram. From looking at that file I would think you have the BACKUP CAMERA in your Ram from the factory but you do NOT have the CARGO CAMERA? And your Ram has the CARGO LED BED LIGHTS (back by the tailgate)? I ask because these are options I have either added or about to add to my Ram and using your file as a guide.........................thanks
No, I have a 2016 Ram 1500 Express with a few upgrades. Yes, what I posted is the BCM current settings config log. I have the backup cam but no cargo cam...at least not yet. I also don't have the cargo bed lights, at least not yet. Lol I may have had the option selected back when you looked but I don't actually have them in service.