Hello forum, could somebody please provide some clarification for me here? I have a 1999 2500 v10 CA exhaust. I just recently replaced all 4 oxygen sensors and ever since have had nothing but problems. In the service manual it says there’s 2 upstream and a pre and post catalyst sensor. The...
After looking into the jeep wrangler 4xe, this looks like something that could be awesome for a power wagon.
The additional torque would be amazing and obviously better mpg would be great. Towing could be greatly improved as well.
I am not a fan of full electric, but a plug in hybrid makes...
So I tried, to research this, so I did use my alphaodb and turned my remote start, not working.. so looking into this more, do I need the hood latch with the switch, in order for it to work. Or any other things..
Thanks
I stumbled upon a very good priced 2500 Big Horn bumper and had to snag it. I understand how to remove the brackets from the truck and how to add my lip to the other bumper. The only problem I seem to have encountered is that I do not know how to do the wiring. I found this kit on eBay and I...
Here is my latest truck, 2014 with 38k and no rust (Michigan Native) Running 37 x 13.50 Toyo Open Country M/Ts mounted on 20" Moto Metals. 6"
Makes my 2020 Lease look like a baby. Hahah
So, I bought a new 2018 2500 Tradesman Cummins 6.7L with only 25 miles on it, couldn't turn down the 14K they took off MSRP. The one thing I miss is the electric seats that my 2006 2500 had and a few other things, but lets talk about seats.
I figure it's possible to purchase either used, or a...
So I have been having a few issues with my truck, which I bought new. I know the 1500's have had some similar issues but haven't seen much on the HD's.
1. Hood flapping at highway speeds. I added a bug deflector and made no difference, not that I added it for that reason. I see that...
I have a 2007 Ram Megacab. Had an issue with Electronic Throttle Body and them a Cam sensor. Replaced both. Now I have a battery drain issue. If vehicle sits for a little while, I come back to a dead battery. I replaced the battery just a month ago (after the issue first showed) and it seemed to...
I am looking for ideas to mount a clean light bar on my 2018 ram Laramie 1500! I would love to fit one behind my grill will the active air shutter. But of course i am open to any ideas. Post those pictures of your rigs!!!!
Having an issue with the front corner of the flares not quite fitting properly. The bolts and hardware all match up but the front corner where the tape meets the plastic part of the bumper is raised causing the tape to let go. Any tips or tricks to fix this? Picture of my truck for bumper reference.
So i have seen that it can be done from a 5th gen 2500 to a 4th gen 2500. But would those new taillights fit on my 1500? I am looking at picture of a 5th gen 1500 compared to a 5th gen 2500 and i swear the 2500 is a little bit rounder on the top right side of the taillight(which would make fit...
I need to replace o2 sensor B1S1. Scan data shows that it is not switching properly. I have a parts manual that shows the part number to be 56028998AB. When I plug this part number into 2 of the online Mopar parts sites I get either could not confirm fitment or does not fit the selected vehicle...
Preamble- from my inspection it seems the 1500 and HD trucks for 2019 use different mountings for side steps, so this thread applies to HD specifically. (Classics might be the same, I haven't checked)
Issue 1: Today I'm under the truck closing up the taped over holes in the rockers, and I noted...
Just bought a 2019 tradesman...
What should I look for as far as upgrades, break in strategies and tips.
First new 2500, so far it rides like a truck, and bounce all over the road.
Gonna add frame mount steps (pipe shaped ones), and lower the tire pressure, wife noticed the transition from drive...
Hey guys. New to the forum here. I have a 2018 2500 with the 6.7 l cummins. Crew cab short bed 4x4. I do a lot of camping...to day only with travel trailer campers. I'm looking to upgrade to a 5th wheel, and I have had some difficulty determining the exact tow capacity if I were to get a 5th...
OK so I've been reading post for a while now but have never posted so here it goes. I've got a '12 2500 crew cab 8'bed 4x4 with the Cummins. I have a 2.5" leveling kit (and air bags on the rear for towing but that doesnt matter)
I just bought a set of stock 20" wheel (because I like them)...
Hey everyone,
First time posting on a forum like this, I’ll attempt to give as much info as possible. My situation is that I have a rolled 2007.5 6.7 l dodge 2500 crew cab which the cab and box are pretty much done. I was however able to find a 2006 2500 crew cab, which is largely the same.
It...
Hi everyone, I’m coming over from an f150 which I had a 2” level coil spring spacer on. I drove over 125,000 miles on that set up and loved it and never had any problems. Now I have a 2017 2500 Laramie with the 6.7cummins. I am looking for some suggestions on which level kit and type of level to...
Hello fellow Power Wagers,
anybody knows how to get the Tow/Haul function active at startup ( always active ) ?
This is a 2019 2500 6.4 hemi Power Wagon, my fourth ram.
The other 3 worked everyday ( 1000 lbs in the back ) and felt better with Tow/Haul enabled.
I plan to keep the Wagon longer...
Hey guys,
Yea I took my 18 in (Cummins) to the dealer earlier this year maybe 2-3 months ago. The Dealer performed the drag link recall, whatever right? It took me that long to realize why my steering wheel was off (drfts right) and the right front tire is going bald.
I called the dealer and...
1997 2500 Diesel. Is the missing cover the torque converter dust cover? Mine is missing ... where can I find a replacement? And does anyone know what size bolts it needs?
Thanks
I have a 2016 Ram 2500. The ride is real stiff. I installed the Thuren springs on the front, which helped. The rear I have kelderman air bags. They did not help at all. Bilstein shocks all the way around. Tire pressure at 65 psi. Stock height and tires. Any suggestions??? I need to get the ride...
I need to replace my original Firestone Transforce on my 2013 2500 Cummins 4x4. I'm at 37k miles (yes, it hasn't been driven much). I live two miles down a gravel road and haul a horse trailer sometimes. We have mild winters, but the occasional snow and ice. What handles well in all conditions?
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.