My 2017 1500 has a vibration I can't get rid of and lots slop in the right CV shaft where it goes into the diff/intermiediate shaft. I replace the CV shaft a year ago and it improved but still had movement and is now quite bad again. It looks like i am going to have to replace the right...
Hello,
I'm in the process of replacing the rear pinion seal on my 2006 Dodge RAM 1500 5.7L, i have already took off the old pinon seal and the new one is ready to install but i don't know what's the best way to press the seal onto the diff, i don't have a seal installer tool or a big enough...
I recently did my 100k mile inspection and found quite a few things that needed to be replaced. Everything ended up coming out great except for the drivers side CV axle. The old one had both boots tear open so I decided to just replace it. The ram dealer wanted like 600 bucks for a new one so I...
Friends;
Apologies for covering this topic in what appears to be another thread. I searched and found several threads, including this and read through them. But... didn't find anything exactly similar. I need some input and I appreciate your knowledge.
"Service Axle Locker" message the...
Hey guys. I’m thinking about putting 275/65R20 for my rear tires & 275/60R20 for my fronts.
Has anyone had any experience with this? Good or bad, please share. I did my research(online). I’d like to know from someone with knowledge first hand.
Thanks
Hello everyone! I have been looking at buying the LSD from Moe's Performance, for 120 dollars you can get the "Rear Master Install Kit" but there is no description on what comes in that kit. Has anyone purchased this kit with the LSD? if so, what all comes with the install kit? Thank you in advance
I got a new ring and pinion for Chrysler 9.25, I know how to set backlash by adjusting the two threaded inserts on the sides and setting backlash to .006-.010” of play, the other measurement is pinion depth which is determined by shims, I keep playing with the system and setting it up and...
Hey everyone, Though I'm new to this forum I've owned my truck for about a year now and I think it's time I get a new truck since I need one that has better towing capability. I have my eye on a 2500 Laramie that the seller is willing to trade for my 1500 Laramie (they are the same year and...
I destroyed the Dana 60 case on my 04 1500 4x4 and all i could afford was a used 9.25. I didnt notice that it was a 9.25 at first or I probably would have passed. My original plan was: Swap my carrier since it is a 3.92 LS and the donor case has 3.55 open diff. Now I have 2 questions:
1. Will a...
I was changing my gear oil for the first time since I’ve owned the truck. Bought at 100k and now has 141k. The fluid was mostly greenish but had a moment of dark fluid come out. What color is “bad” gear oil?
Last week the rear diff blew up on the truck and im thinking ill just replace the whole rear end and go with a 3.92 instead of 3.55 is this just an easy pull out put another back in or is there more id have to do?
I have a commuter car so if im using my truck, its for truck things, im not to...
Im trying to upgrade from the 3.21 gears currently on my 2014 ram 1500 2wd running 35s. I have found some oem 3.92 axles or a yukon 3.90 kit. I have found a kit on jeggs performance for $1,300 that includes everything I would need (I believe). Will provide link below. Is this a good kit and...
I am looking for some advice. I currently have a 2013 Ram 2500 Tradesman 5.7 gasser with RWD. It has an open differential. This vehicle will only be used for towing my camper to WI state parks and we don’t plan on doing any boondocking in off road locations. Can I get your thoughts regarding...
I have a 2003 Ram 1500 with a 5.7L in it. I've recently noticed a grinding noise when accelerating from a dead stop. Can't tell exactly where it is coming from but I think it could be coming from the transfer case or the differential. If anyone has had this problem or knows anything it would be...
Hi All
I was looking at potential upgrades for my 2006 Ram 1500 Mega Cab with dual solid axles and 4wd and The first thing was looking at Locking Slip Difs. I was wondering if anybody had recommendations for LSDs that would be a cheaper option that the $650 one I found online and what fit's in...
Thinking about having one installed in my 2010 “5” speed. Most of my driving is in town with hills and I’m geared high now but not sure what ratio. 3.23 maybe? Hit ~55mph before shifting out of first WOT.
Anyone made this change and have any regrets about it??? How’s mileage changed?
Also...
Hello, I’ve got a 2011 ram 3500 crew cab auto 70k miles. A quite but noticeable thumping sound has came up on my ram starting from about 30mph and increases as I go faster up to 70 and goes on while in 2wd. But once I put it in 4wd things go butter smooth and the sound goes away, but once in 4wd...
Good morning all, so yesterday im driving along, feel a loud pop, then my truck is in like neutral, look under thinking i snapped the drive shaft but its still spinning, so i put it in 4wd lock, to get me off the road, starts going then goes back as in neutral, saying 4wd power reduce due to...
I blew up my rear end on my 2002 Ram 1500 2WD.
So far I haven't got it fully apart, just removed the cover. My spider gears shattered. Need advice on what parts will interchange. Will update soon.
Looking to do a complete rear end swap using a 1998 Dodge Van 2x4 rear axle into my son's 1996 Ram 1500 4x4 pickup. Both differentials are 9.25 w/ 3.55 ratio. Seems a close match but we have noticed differences in the brake shoes, brake hardware and drums. Will obviously need to buy...
I own a 2013 Ram 1500 V8 4.7L Recently I had to replace CV and axle on Front L side. Technician at body shop told me that the differential fluid had been low after I got it changed at Grease Monkey ( ~ bad decision) and I also had them do an inspection and fluid exchange. I picked up the truck...
For those who are looking to get their rear differential fluid changed out, here is my tutorial video I made of the process I used. Overall, very simple process, with minimal amount of tools. I threw in Mobil 1 75W-90 to suffice, until I can throw in some amsoil for the long haul. After draining...
If you have ever re-geared any vehicle in the past, you know that after its first 500 miles, you need to change out the fluid. After using my 4x4 for a bit, and after doing a rear diff fluid change, I opted to flush the fluid out for the front diff as well. Will your truck survive after 30-60k...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.