I've been searching for a leveling kit and Eibach has a kit with front and rear shocks and springs lifting the front 2.75" and rear 1" (part number E80-27-001-04-22) for $714 on their website but I can't find that anywhere in stores. I called them and they said it would be at least a month...
Hello I’m new to the forum I just have a question. I currently have 37x13.50x20 with a 6” lift on my 2014 1500 big horn and I haven’t had any issues but someone came up to me and told me that they are too big for my truck and can ruin the axel and hub barrens. I’m worried now. It’s not a daily...
Hey everyone. I have a bit of a big project. I decided to go bigger than the 6 inch rough country lift kit that I currently have sitting in my garage. I decided to go another few inches on top of that. I know everything I need to accomplish this lift and I have my list planned out. The only...
I just got a set of 22" rims. What size tires work on my 17' ram without doing a massive lift? Im willing to do like a 2 or 3" if needed. I dont want the new tires to look stupid but i also want to use stock rims/tires in the winter. I dont want a lift to look silly through our sometimes 8...
I've been searching for 45 minutes now. I cannot seem to find any information on rear adjustable bils. I have 17inch rims with stock size tires (BFG - TA KO ; original yeah!). I want to keep the rims and tires because I love them. I want to give the truck a little facelift when it's time to...
Hey everyone. Been doing research for a while and just had a "small" thought. I decided that eventually I'm going to try and re gear over the course of this summer. I've found out that in the models above 2011 it is that the largest gear you can fit in the front differential is 4.56. I've been...
My truck vibrates like a massage chair above 80, thinking it’s the pinion angle, any ideas are appreciated (tires are truly balanced though and it is aligned really well), if it is pinion angle what is right and how do I achieve that?
Front end specs:
Stock:
Sway bar
Tie rods
Front and rear...
I am ordering the front and rear long travel kits, but prior to installation I need to remove the 4" "MOPAR" suspension lift the dealer installed.
My dilemma:
The install of the diff drop bracket required frame modifications to the lower control arm mounts. I have a former employee willing to...
hi I have an 89 ramcharger and I’m going to lift it but not sure what to do it has 3 1/2 blocks in the rear which as far as I know are stock and I’m wanting to do a four inch lift but if I do that wouldn only give me half inch more may may be a dumb ? But I need some help and any of it would be...
So I have a 2015 1500 and I was wondering what is the most aggressive tire size I could run on 20” rims without rubbing. I have stock wheels and tires right now and I just need something to make the truck look a little bigger and better.
Hi everyone,I’m new to the forum! I just picked up a used 2016 1500 eco diesel with airride I wanted to put a small lift and larger tires? Has anyone just locked air ride out at off-road 2 instead of lifting? If so what was the result? Looking to find out max tire size for each option! Maybe a 3...
Hey guys, new to the forum here. I recently bought an 04 Dodge Ram 1500 SLT 2wd. Came with nearly bald 33” street tires on the stock chrome rims, (Which I hate). I found a guy selling a set of Fuel Battle axes 20x10 with 275/65r20 Nitto G2 At’s (34”) for $1,000. I’m hoping to buy them in the...
I am looking at putting a larger cam in my truck, it’s currently a 2012 ram 2500 with the 5.7 hemi, non mds. I was wonder what the maximum loft I can go is. I’m currently looking at one with the following specs and need to know if it will work. Most likely i will be putting this into a 6.4 eagle...
After a turn of unfortunate events, I am unable to lift the truck as I had wanted too.
I am needing to sell of the lift parts, and this is what is left.
You are looking at a set of rear new in box, Icon Springs 2009-Current 1.5" lift.
These have not been installed, or touched, simply opened to...
So I recently just purchased a 2014 Ram 1500 sport. The previous owner installed an aftermarket air ride in the rear. As I was looking at lift kits, I see most kits will not work with the air suspension. Now being this one is aftermarket and only in the rear I'd imagine it just needs to be...
Hey everyone. I've finally decided I want to do a six inch lift with 37's on my 2015 Ram 1500. I see posts that say it is an absolute dog and those few rare posts that say 3.21 with 37's don't seem to be an issue whatsoever. I feel like I am way too stuck on 37's and how nice they look. But I...
Hi! So I have a 2014 Ram 1500 Hemi 5.7l. I have recently installed a 3 inch lift. Have 18x9 Fuel Vapors coming with a -12 offset. And want to make sure the tires I ordered wont rub, or will rub minimally as I don't mind a little trimming to achieve what I'm looking for. They are Toyo Open...
I'm in the mechanical process of fixing up my 1988 w100. So far I've replaced the ujoints at the axles (and about to do the pinion side front/rear drive shaft ujoints), front brake lines/rotors/calipers, new drums/shoes, valve cover gaskets, plugs, battery, front/rear diff fluid, and gas tank...
What's up everybody, I'm new to the forum and also a new ram owner so bear with me a bit. Long story short, I just picked up an 05 1500 with the 4.7 liter as I needed something to drive in the winter months. I'm thinking wheels and tires is something that I will hopefully be doing sooner rather...
Hi everyone. I found this forum site gives the most feedback to the people who are posting so I thought I'd start here. I recently bought a 2015 ram 1500 Express 3.6L with the 3.21 gearing used with 50k miles. Even though a hemi would've been great it was never an option for me due to a...
Just installed my zone 6/5 on my 2017 ram 1500 4x4. Been a couple days so I thought I would check how everything was looking underneath.
Lift was installed my self.
Noticed that my lower control arms (both sides) have marks on them from the knuckle hitting it at full turn. I’ll attach a...
I was going to wash/wax my truck this weekend and decided to remove the flares to clean behind them. There was a lot of dirt/sand behind them, surprised me because they seal pretty good. Luckily the clear tape prevented any paint damage. Looked good with them off so I think I might drive like...
Hey guys,
Looking to put a set of wheel spacers on my truck but at a cross roads on if I should go with 1.5" or 2" etc..
2011 Ram 1500, bilsteins set at 2.1", factory wheels,275 60 20 Falken wildpeak at3's, 2500 flares.
Stance wise I would like the tires to be flush with the flares, maybe...
Ok guys I've been traveling alot for work so haven't had a chance to install my zone 6" lift yet. Hoping to start once I get home but trying to get all my ducks in a row. What do you guys think of this rim and tire combo? I'm thinking about taking my chances with the 37s even tho I have 3.21...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.