help

  1. A

    Help finding illustrated parts breakdown/reliable parts site. 4x4 Link Bolt

    Whats up everybody, So I recently dropped something down by my 4x4 shift and when I nudged it with my arm it just started moving all ***** nilly. After further investigation I found that the connecting bolt for the linkage disappeared. Ive been searching for a break down online to try and...
  2. Jrex

    Headlights and Dash lights Intermittent flickering issue

    So both my headlights and my lights on my dash are flickering and sometimes sticking on even when my switch has them in the off position. No other electrical components are affected (radio, cigaret liter, subwoofer, etc.) When I’m under the hood I can hear and feel a relay clicking. I took out...
    • Jrex
    • Thread
    • electrical electrical issues electrical problems help
    • Replies: 2
    • Forum: Audio & Electronics
  3. Cameron Davies

    I don't know what to pay/charge for 03 1500 parts

    Can anyone give me an idea as to what to pay/charge for a very little rusted 2003 Dodge 1500 2wd with 216,000 km parts? I am asked most about - box - tailgate - mirrors - grill - hood - transmission - seats - fenders - whole truck - etc. I feel I may asking too much for the truck I...
  4. W

    Ac stuck on

    my AC is stuck on no matter what I do. I remove the relay in the clutch turns off. I've even swapped relays and it's still stays on when they're plugged in. Turning on the AC and turning off the AC does nothing it only turns on the condenser fan. I can't figure out why it won't respond to the...
  5. R

    Cam n Lifter Job

    Lifter seized up on #5 looking for a list of all applicable parts including non related parts i should be replacing while im in there, that i will need to complete this job. Here is what i have so far in my cart. - Cylinder head bolts - Head gaskets - Manifold bolts - Manifold gaskets -...
    • Roloff
    • Thread
    • 2011 cam camshaft help hydrolic lifters lifter failure lifters
    • Replies: 5
    • Forum: Engine & Performance
  6. G

    Weird noise

    I recently bought a 2009 1500 SLT, I’ve been hearing a strange noise and need some help figuring it out. When I accelerate, usually in low RPMs there’s a weird metal vibration noise I hear. Once the RPMs get higher it goes away. Doesn’t effect driving, just annoying. Anyone have an idea what...
  7. O

    LED Pod HELP!

    so I have a 2015 ram 1500 and I wanted to take the stock dog lights out and replace them with four led pods, two per side. I purchased a bracket and mounted them just fine. No problem there. I spliced into the factory fog light harness and soldered the pods to it. Fog lights work perfectly when...
  8. DizzyFranco

    What cause my ring gear wear to look this way?

    is there anything useful that can be learned from this wear pattern? if you are experienced with differentials, can you tell me what caused it? backlash too much or not enough? pinion depth? btw its a chrysler 9.25 axle side adjusters and i believe the pinion has crush sleeve. 96 5.9L v8 4x4
  9. S

    Chugging/Stalling

    I have a 2004 1500 5.7l Hemi that has recently started chugging/stalling upon acceleration. after about 20 mph or 2500 unless eased into real softly. Has no problem starting, doesn't have a miss or a bad idle just when stepping on the gas. I also went to gravel and pressed on the brake and it...
  10. P

    Lumbar support not working

    Hello, I have a 2014 1500 sport. I was driving today and noticed my lumbar button was not working. I tried to find where the fuse is but the owners manual doesn't say anything about where and what that fuse is. Any help would be great. Also in sad news, during a snow storm I slid off the road...
  11. R

    Need Help with Brakes - Pedal going to floor

    2007 Ram 1500, quad cab, 270,000 miles: I just changed rotors, pads, and calipers all around. I have bleed the brakes 6 or 7 times starting at the passenger rear and working toward the master cylinder. I have bleed the brakes with the key on, in the ignition, out of the ignition, and with the...
    • Rustige
    • Thread
    • brake bleed brake pads brakes calipers help pedal soft rotors
    • Replies: 10
    • Forum: Exterior
  12. M

    Death Wobbles

    HELP .. I'm currently overseeing my son's 2005 Dodge Ram 2500 Cummins Turbo Diesel SKL and while taking it for a spin punched the gas to get into oncoming traffic, the whole front end began shaking and shimmying so bad I thought the truck was going to shake completely apart. Is there a...
  13. Rambo47

    Need some help loss of power

    I have a 2004 ram 5.7 hemi. Maybe a month ago I replaced all of my o2 sensors after having the cel on for maybe a year. 100 miles later my truck is having a loss of power or even stalling when braking. RPMs drop to about 500 or lower. No cel and I'm out of ideas. Any advice would be great...
  14. Jack317

    No turn signals or hazards

    2001 dodge ram 2500 here, got home from work last night and parked it with no issues, went to leave today and had no turn signals/hazards. I replaced the flasher relay and replaced the two regular fuses with no luck. Is there anything else that could be causing this besides the turn signal...
  15. spencerstockwell

    Help!

    Bought my ram 1500 5.9 recently, and when shifting into 4 high i started to hear a clunking sound and felt a slight bump. It first would only happen when in park, but now happens always. The sound/feeling comes from under the driver side footboard. I have videos of the sound from in the cabin...
  16. APMann95

    How to Clean Touch Screen?

    I just picked up a used 2016 Ram 1500 and noticed that the touch screen in the truck's dash has some sort of residue stuck to it, presumably from the protective film that was on it when brand new and wasn't removed for a good while. I'm kind of able to scratch it off but don't want to harm the...
  17. Ryan Roberts

    Found random blue rubber cover like thing under hood in battery tray!!

    I’m at a loss I filled my windshield washer fluid up and briefly gave the engine a once over oil trans fluid etc and found this blue rubber thing sitting loose in the drivers side battery tray the truck ha 13700 miles not real sure where tf it came from please help me ole great wise ones of this...
  18. S

    Instrument cluster issues

    So I have looked high and low for answers to what's going on with my cluster. So I'll put this out to anyone that can help. I have a 1997 ram 2500 v10 8.0l and the cluster has been having issues. The only gauges on it that work are oil pressure gauge and fuel gauge. The OD light is on however it...
  19. D

    Just about to buy.. please help me confirm some things quickly... THX

    I'm literally just about to buy a 2018 2500 with 6.4L HeavyDuty. I need to verify (becuase it is not LISTED in the window sticker) the Hitch class and if the wiring is in place for the 7 pin connector. I see some models list those items out specifically. Here is a link to the Window sticker...
  20. L

    Injection Pump Problems

    I am new to this so I hope I did every thing correctly. hear is the story, about a week or so ago I noticed a drip coming out of my vent on my afc housing on my 93 d250. After doing forum searches I came to find that my fuel pin o-ring was leaking. The forum I got this information from had...
  21. Sho_Tyme671

    Aftermarket/Rebuilt CV joints

    GM Mopar fam. I am new to this forum so please bear with me. I was looking into rebuilding the front end of my '04 Ram 1500 4x4. I am starting with the CV axles due to boot failure of the drivers side and I know it's smart money to change both at the same time. I was looking on RockAuto and...
    • Sho_Tyme671
    • Thread
    • 1500 ram 4x4 aftermarket cv axle front end help oem rebuild review
    • Replies: 4
    • Forum: Exterior
  22. M

    Need Help Diagnosing My Truck

    Hello everyone, I'm new here and was wondering if I could get help figuring out what is wrong with my money pit..I mean...truck. It has developed valve tick(seems like cylinder 1), the belt or something makes a squeak like noise even though I have proper tension on it (AutoZone sold me two...
  23. A

    1.78 amp draw !Help! Any info is appreciated

    After leaving the truck for 2 days I came back to a dead battery just assumed I left somthing on well another 2 days and same thing. Then I noticed my battery hand will somtimes more often then not read 1/4 when all accessories are on and will come back to normal when Rpms pick up .NOTE. Truck...
  24. R

    Does this look correct?

    5.9 360 at TDC, is this the correct rotor position?
  25. K

    97 5.9 360 led blinker problems.

    I have recently bought led for my rear blinkers. My old bulbs work fine but the new led just stay on and don’t blink at all. They are orange 3157-A which is what the others are but they won’t blink at all, they just stay on. It almost seems to act like it can’t recognize the led. Idk what to do...
    • KaneWat
    • Thread
    • blinkers help led bulbs upgrade
    • Replies: 2
    • Forum: Exterior

Latest posts

Members online

Total: 740 (members: 5, guests: 735)
Robots: 446

Forum statistics

Threads
210,997
Posts
3,060,834
Members
171,039
Latest member
Reticle918
Back
Top