wiring

  1. Z

    1984 D150 Brake Lights not working

    New to these 1st gens so sorry in advance. Got a 84 d150 318 727 marksman with no working brake lights. Brake switch has been checked and is getting power out when pedal is depressed. Can send power to them with a power probe through the bulkhead connector using the yellow/black wire and they...
  2. K

    Wiring help for Aeroskin Lightshield Pro

    New member, I just put the Aeroskin Lightshield Pro on my 2020 Powerwagon. I know it’s a controversial add on, but I would love some help with figuring out what wires I need to tap into to power it. I haven’t been able to find much info on the pro. There’s four wires to the lightshield: Black...
  3. M

    ECM wiring harness replacement

    Hello, not sure if I am posting this in correct location...someone please move if not... 2016 Ram 1500 5.7 Have taken my ecm board out one too many times, and the connectors have broken. Not only the outside part with the red locking lever, but the actual connector with the green and blue tabs...
  4. H

    Add power locks to ram express?

    I have purchased the materials that I believe are necessary to add power locks to my ‘13 ram 1500 standard cab W/O factory power locks or windows (actuators, wiring, connectors and relays). If the wiring harness is the same on all standard cabs up to the cab to door harness connector could I in...
  5. D

    Wire Gague

    Hey all, Before anyone says anything, buying an adapter is out of the question. Some ******** already cut the wires for the harness so I need to make do. I am installing an aftermarket radio, and sized the dash for the Double Din unit I'm putting in. Except the wire on the new harness for the...
  6. ObiwanJ

    Wiring Harness for electric tailgate

    Hey guys... I need a little help here. I've been searching on your site, however I'm running into some issues. I am looking for the wiring harness that connects from the left and rear latch so that we can make this tailgate functional. The part that is confusing me is we have the side...
  7. Jwilzz

    Removing/Replacing stock alpine amp

    Hello guys appreciate any help you can give. I have a 2012 1500 with the alpine sound system. I've currently replaced my stock head unit with pioneer dmh-wt8600nex. I used the maestro ads-mrr2 interface to retain stock amp and steering wheel controls and all that good stuff. But for some...
  8. R

    Running wires through the firewall

    I'm planning to install a VHF ham radio in my 2017 RAM 1500 SLT (yes, I have a license). The radio is capable of putting out 50 watts of power, which means that I am going to have to wire it to the battery directly, I cannot use the cigarette lighter outlets because it will blow the fuse. I...
  9. N

    FActory Manual - Connector location and pinout

    Hi, so I am doing a 4th ge to 3rd gen seat conversion. Mechanically all good, but I am trying to adapt my 3rd gen to features on those 4th gen seats, like vent and heating and eventually memory. Also AC outlet. I found all I neeed form 3rd GEn, and partialy of what I need on 4th Gen on...
  10. PowerWagon2019

    aux lights wiring question

    Looking to add aux lights (light bar) to my 5th gen HD. Wiring is pretty straight forward except for the high beam trigger circuit. (allowing the ability to turn on the light bar only when high beams are on) I read where others have used the driver side white/green headlamp wire to drive this...
  11. T

    Help w/ Un Pinning FCM Wires from connectors

    Hey Rammers.... lol. I have searched here and other sites + googled ... I cannot figure out what tool i need to unpin the wires from the FCM. Trying to remove wires from a donor truck and install for upgrades to my 14 RCSB. I got lucky with my fog light project and they popped right out when i...
  12. D

    Putco blade install help

    I recently bought a Putco blade tailgate led light. And have been told to hard wire it in since my truck has a tow package and unsure if it has automatic trailer detection. I plan to hard wire it into the drive side rear break light assembly. Does anyone know which wire does what. If anyone has...
  13. L

    Wiring help for 3rd brake light on truck cap

    I recently failed my inspection because the 3rd brake light on my truck cap is not connected. Through research, I found out about the wire underneath the truck specifically for this purpose. After wiring it up, the 3rd brake light still didn’t work. I tested the brake light itself with a...
  14. A

    Tow mirror capatability

    I have a 2000 dodge 2500. I just have regular powered mirrors. I'm looking into putting some tow mirrors on and just have a few questions. 1st: how capatable are tow mirrors across the generations? I saw a video of a dude who put 4th gen mirrors on his 2nd gen, and it seemed to go smoothly and...
  15. J

    2008 Ram 1500 - Trailer Wiring & Connectors Missing

    A great case of my dog ate my homework. My dog ate a huge chunk of the wiring harness, connectors, trailer receptacle out of the bumper, and the left side license plate light wiring and connector. I am left with the end of the wiring wrap that comes from the front of the truck with the...
  16. O

    LED Pod HELP!

    so I have a 2015 ram 1500 and I wanted to take the stock dog lights out and replace them with four led pods, two per side. I purchased a bracket and mounted them just fine. No problem there. I spliced into the factory fog light harness and soldered the pods to it. Fog lights work perfectly when...
  17. J

    Interior Wiring - Passenger side under dash

    Does anyone know what these wires are for?
  18. K

    Utilizing the factory fog light button with aftermarket lights

    This may be one of those things that is just far too difficult to be worth while, but i am hoping you good people can give me a hand. I've got a 2014 Ram 1500 Sport, and after ripping the front bumper off 3 or 4 times in deep snow and mud - I went with an aftermarket steel bumper with far more...
  19. N

    Power Wagon elockers wiring

    Hi, so I bought a set of power wagon 2007 axles with elock to fit on my truck. It has a 4pin plug...and they didn't come with pig tail... so I wonder if you guys know the wiring of it and plug to use. Thanks
  20. XLILBEASTX

    The "BIG 3" upgrades? Help plz.

    So i decided I wanted aftermarket subs in my truck. I went with the kicker L7 Q-class subs. The plan is too run 2 4ohm 12's together at 1ohm with a mono block amp pushing 1800 watts RMS. The problem is I know my truck has a 160 amp alternator, and don't know if/how to power this type of amp. I...
  21. C

    running lights dont work

    i have a 2002 dodge ram 1500 sport package with the 360 magnum 5.9l and i have an issue with my left running light all of my lights work except that running light the blinker works and iv tried 3 bulbs but same result any suggestions? iv already looked at the fuses and relays look good! iv also...
  22. S

    Instrument cluster issues

    So I have looked high and low for answers to what's going on with my cluster. So I'll put this out to anyone that can help. I have a 1997 ram 2500 v10 8.0l and the cluster has been having issues. The only gauges on it that work are oil pressure gauge and fuel gauge. The OD light is on however it...
  23. Z

    What are these wires

    Need help identifying these wires. Its a 2003 ram 2500 SLT QC/LB 4x4 Wire on left is Black-black/yellow Wire on right is Purple/yellow Purple/yellow Green/yellow Green/red They are not connected to anything. And i would love to know wuat they are and what the wires correspond to. Thank you
  24. Nick4320

    Cargo Light wiring

    Hey all, new to the forums here. I go to the beach to surf fish during the warmer months and got to thinking having some flood lights under the rear bumper would be nice. Not trying to light up the entire beach but just some light to help clean up at 12 at night after fishing is over and the...
  25. Vans28sk8

    2005 Ram 1500 Tail light mess

    I hope one of you guys can help me out. I purchased a 2005 1500 quad cab recently. The tail lights that are on there are older clear altezza’s that are fogged up and honestly just plain ugly. I ordered a new set of OEM replacements and went to put them in and to my surprise the left tail light...
Back
Top