indept
Senior Member
- Joined
- Sep 10, 2017
- Posts
- 3,219
- Reaction score
- 4,761
- Location
- South Jersey
- Ram Year
- 2017
- Engine
- Hemi 5.7L
I just installed mine on Saturday. No leaks. Interesting that cold (80 deg f here) pressure is the normal 53 psi idle and aroub 2000 rpm and when engine is hot its 50 ish driving and 32 at idle like it was before the relocation. What's interesting is that drving from cold for about 2 minutes then punching it to merge into traffic about 3000 - 3500 rpm, pressure goes to 65 psi. I never bothered to check it under those conditions before the relocation.
Do any of you get that much when cold?
Here is my installation. Anywhere that the braided hose touched anything I cut some heater hose lengthwise and put it around the oil line to keep it from rubbing through after these photos were taken.
Do any of you get that much when cold?
Here is my installation. Anywhere that the braided hose touched anything I cut some heater hose lengthwise and put it around the oil line to keep it from rubbing through after these photos were taken.